Zoning

Electric-Zone-Damper

Electric Zone Damper

Dampers are galvanized steel, single blade dampers complete with a 24 Volt, spring return actuator. These dampers are shipped complete and ready for installation. Damper can be installed in any position in any properly sized duct. They are rated for duct systems less than 1.0″ WC. Damper has a simple adjustment for setting the minimum position.

Compatible with most control panels 18-gauge steel spiral shell 24 volt synchronous motor Quiet operation Simple adjustment for setting the minimum position.

Zoning Control Board

Barometric bypass dampers are used to automatically bypass excess air when increases in duct static pressure occur due to closing of zone dampers. Various relief air control settings are accomplished by simple adjustment of the weight on the arm. Barometric relief dampers are recommended for systems up to 0.75″ W.C. of static pressure. (For higher pressure systems use EB motorized bypass dampers.)

Also available constant pressure regulating bypass damper used in forced air zoning systems to relieve excess static pressure. With it’s compact design, the Easy Bypass is easy to install with near 100% accuracy. Unlike other bypass dampers, the EZ-BD can be installed in any direction and is more cost-effective than most.

Zoning-Control-Board
Bypass-Damper

Bypass Damper

These panels represent the most contractor-friendly zoning solution today. The single-stage heat/cool panel designed to control 2 zones in residential and light commercial applications. We have two models that are designed to fit three-zone applications for single-stage, multi-stage, heat pump or dual fuel systems in residential and light commercial applications. All panels can accommodate 2 or 3 wire zone dampers. Metal Enclosure is available as an additional option on certain Panels.

  • Auto changeover
  • First call priority with time share
  • Electronic discharge air sensor (sold separately)
  • LED status indication
  • Independent fan control by zone
  • Short cycle protection
  • Works with 2 or 3 wire zone dampers
  • Purge cycle option (select panels only)